Can I just come at it from behind and cut off the pole with an angle grinder or do I need to be more sophisticated? I’d do it in the middle of the night

  • FatherPeanut@pawb.social
    link
    fedilink
    arrow-up
    0
    ·
    edit-2
    3 months ago

    Pep talk:

    An angle grinder can work if you use a cutoff wheel, but knowing the camera’s technology, the likelyhood of a vibration sensor pinging back home is too high for my recommendations. Plan to be out within a minute or two, as you wouldn’t want a cop responding to it. If it is chopped, dont bring it with you, make sure there is a very nearby method of breaking the camera’s innards. Angle grinders do not work as well on plastic as metal in many cases, as plastic will melt from the heat and bind to the disk. A possible solution could be a sledgehammer, if you feel confident in your ability to wield it.

    Other approaches can work well too, but it depends on how much damage you want. Some speak about laser pointers, but I advise against that. You’d need an 840-960nm laser of sufficient power, and that can blind innocent people within proximity. What I’ve seen mention of is a spraypaint can on a stick, but that only damages easily replaceable and cheap covers, so it’s only a temporary fix that’d heighten police interest. Nonetheless though, its a low-risk way of telling them to Flock Off.

    If you want to stay hidden during night hours, lining things with 840nm IR LEDs will obscure the vision (+920nm works too, but 840nm is the most common). This won’t work on daylight hours though, as that uses visual light more than IR.

    Also, phone stays at home. Geofencing, Bluetooth signatures, WiFi pings, and SIM tracking, etc. are way too prevalent to risk. And as always, stay safe when using an angle grinder, those fuckers can hospitalize. Park far away, if a car is used, and consider using a “Flock Off” ESP32 device to detect for nearby flock cameras, github page here: https://github.com/colonelpanichacks/flock-you… And I think the last thing worth mentioning is to have gloves and face coverings. Aaaaaand I’ve yet another new thing, avoid speaking, and consider obscuring your walk pattern if you do appear in it.

    To find nearby cameras, this website works well for me: https://maps.deflock.org/

      • FatherPeanut@pawb.social
        link
        fedilink
        arrow-up
        0
        ·
        edit-2
        3 months ago

        Specifically IR LEDs in the 840nm range. How you apply it if you choose to do so is up to you, but it obscures vision for the camers’s night mode. What some people have done is put an array of these 840nm LEDs on a little handheld surface, which they then pointed at the camera as they walked by it. It won’t damage anything, but it does not see well while being beamed.

        What you could try is wearing a hat with a mount on it that’s just filled with loads of these LEDs. Doesn’t need to be anything fancy, just gotta work. Still avoid being caught by the camera, but its a nice redundancy if something goes wrong.

        Edit: Found a video to give a rundown. They basically used an infrared floodlight from an online retailer. https://www.youtube.com/watch?v=nt1e1QHDES8

        And yet another another thing to note, which is honestly kinds scary about just how much this surveillance has progressed, is that statements from Police officers and Flock representatives state that the cameras can identify individuals by their walk cycle. Absolutely mind-boggling, and in some ways I feel I want to see it to believe it, but I wouldn’t be surprised to find this is true. So yeah, stay away from the camera, and if it’s pertinent enough, maybe put something near the crotch area in your pants such that your gait is altered.

    • Bizzle@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      0
      ·
      3 months ago

      I have a 60v battery powered angle grinder w/ cutoff wheel that kicks a surprising amount of ass and the poles don’t look like they’re too crazy, looks like aluminum? I also have a 5# sledge that I reckon could smash it pretty good, I’m a pretty big dude so it would probably only take a couple swings.

      I considered blinding it but decided that if I can blind it with a laser it can probably see me and that footage would presumably already be in the cloud.

      I’m going to do a practice run on a piece of aluminum pole, I think I could chop it and smash it and get the fuck out of there in under two minutes but I’m old and fat so maybe not 😂 phone 100% stays home and my wife in well trained in the art of lying to pigs

      • pr0xy_prime@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        3 months ago

        Band saw, no vibration, no sparks, cuts metal/plastic like hot knife through butter. You’re only limited by the size of the bandsaw opening so if the pole is too thick it won’t work otherwise your best choice imo