I’d recommend lowest setting that produces enough vapor to your liking - higher settings can “burn” around the heating elements and clog throughput. I’ve found 2.0 to be appropriate, but different cartridges might work with different voltages more efficiently
The budtender at the cannabis shop told me 2.4; I figured they knew, since they’re the pros.
Mine preheats (10s), so I often do that first (you can still draw on it).
How much was your vape thingie, got a link?
I’m in Ontario, Canada, and this is price at local dispensary. I’ve had one over 18 months and haven’t noticed any performance or battery depletion yet; picked up a 2nd one about 6 mos ago.
Looks way kooler than mine, got a thing for red
Its annoying how companies just stick “PRO” at the end and I want it
They have a few colours - I’d snap up a purple one, but no dice.
Need more context. Is this a concentrate? Are you smoking flower? What kinda vape?
Its a thc-only vape liquid (greenish goldish brownish) in a little screwable glass vial and a mouthpiece
The vape is a rechargeable (USB-C) vape pen with a dial at the bottom that lets you adjust voltage (i think == heat energy) from 1.8…4.2V. You screw the vial into the vape pen and double press a button quickly which makes it start heating the vial contents and you vape
Sounds like you have a random 510 thread atomizer with concentrate in it. And you have a stick battery with 2 voltages maybe more. Try the lower voltage if you can pull through while hitting it 1.8 is fine. It’s never a good idea to blast at high power as it can be detremential to taste and atomizer life. Hope your oil is from a legit source.
Don’t expect massive clouds it’s not a glycol mix if you can see vapor it works
I believe it is, quite pricey and weed is super regulated and taxxed here
Those are oil carts. I would recommend the lowest temperature that still gives you a hit. Higher temperatures will burn through it faster and get you higher faster but the low temps will gives you a better taste generally, and will release less bad things into your lungs and cause less irritation. If it’s a really cold day, or if the cart is clogged that’s when you use the higher temp. I personally think dry herb vapes are alot better in many ways though.
I think i unknowingly stuck to 1.8 for always until today but i cant get anything out of them even tho there isclearly quite a bit of juice left in the two vials i have to finish off. I tried 3.8 randomly just now and that seems to be the baseline for getting any of the remainder out and visible vapor stuff after i exhale
If you have a mostly empty cartridge, stand it up vertically in the sun, it will all melt to the bottom
I elasticed them together and put them in the Yeti cub lid opening with piping hot tea inside, might that help?
I mean, do you have like a radiator or space heater? That’s what I use in winter. I stand it vertically a couple inches away. Could go full crackhead and hold a lighter or candle near it and spin the cart ideally you’re trying to get the glass to about 100° f and then gravity will do the rest.
Is there a way to do that inside (theres no sun), like maybe put it in hot water standing vertically?
It will often still flow even without direct sun, just takes longer. I use a hair dryer if I’m in a rush.
I a rush lol that awesome
As said, the lowest setting that gives you a good hit, every coil and oil combo is going to be a bit different. The trick is to keep air moving through the coil while it’s on, preheating or not, and to hit it slowly. Don’t try to breathe through it, it’s not a bong. Sip on it, take short hits with a few seconds between them. The oil is pretty thick, it’s very possible to starve the center of the ceramic heater of oil on extended or hard hits, that causes this crusty burned residue to build up and the coil stops hitting right.
Slow and steady, let the coil refill with oil between hits.
I’d advise playing around with the settings yourself, especially once you’ve taken into account other answers that can act as a benchmark.
For example, I don’t have a vape where I can directly control the voltage, but I do have a Flowermate, which heats at three settings: blue, purple and red. The blue setting is quite mild and the vape is quite flavourful to the extent that I can readily tell the difference between different strains (I’m guessing that at this temp, the vapour is fairly heavy on terpenes).
In contrast, the red setting provides a much stronger hit that tastes much closer to smoke than the vapour produced by the blue setting. This makes sense, because I think the red setting is about as high temperature as you can go without risking burning.
If I had a vape where I could control the voltages, I’d be able to test it to find out the rough mapping of voltage to these temperature settings that I’m used to.
