Laser@lemmy.caM to Cyberstuck@lemmy.caEnglish · 3 days agoNothing but qualitylemmy.caimagemessage-square46fedilinkarrow-up1507arrow-down118
arrow-up1489arrow-down1imageNothing but qualitylemmy.caLaser@lemmy.caM to Cyberstuck@lemmy.caEnglish · 3 days agomessage-square46fedilink
minus-squareAlbum@lemmy.calinkfedilinkarrow-up49arrow-down5·edit-23 days agoThere’s not supposed to be a frame there. Pull the side panel off a GM and it’s the same. The frame is under the truck. There should be a rigid structure on the flat of the bed.
minus-squarereal_squids@sopuli.xyzlinkfedilinkEnglisharrow-up55arrow-down1·edit-23 days agoIt’s unibody, the waffle-like part in the picture between the rear glass and the wheel well is part of it’s frame edit: here’s a picture from their manual
minus-squaremojofrododojo@lemmy.worldlinkfedilinkEnglisharrow-up3·2 days agohilariously, the frame is very thin in places and could be bent with a crescent wrench.
minus-squareBuelldozer@lemmy.todaylinkfedilinkarrow-up11arrow-down2·edit-23 days agoThis has clearly been disassembled. You can see the bed which means both the interior and exterior RR panels are removed.
There’s not supposed to be a frame there. Pull the side panel off a GM and it’s the same.
The frame is under the truck. There should be a rigid structure on the flat of the bed.
It’s unibody, the waffle-like part in the picture between the rear glass and the wheel well is part of it’s frame
edit: here’s a picture from their manual
hilariously, the frame is very thin in places and could be bent with a crescent wrench.
This has clearly been disassembled. You can see the bed which means both the interior and exterior RR panels are removed.