PS/2 still works the same as it always has. No changes there. It’s not really possible to change how PS/2 operates because it wouldn’t be backwards compatible with old keyboards or software.
Legacy stuff sticks around for a while and generally doesn’t change, since it needs to retain backwards compatibility. Modern x86 processors also still have a “real mode” with 1MB RAM max, like what the 286 versions of DOS and Windows 3.0 used to use.
You can buy industrial PCs and motherboards today that not only have a PS/2 port, but also other legacy stuff like parallel and serial ports, ISA slots, etc. There’s actually motherboards that have ISA, PCI, and PCIe all on the same board. There’s 25+ year old machinery that’s still in use and extremely expensive to replace, so it’s not uncommon to have new computers with legacy connectors/ports in industrial environments.
Enthusiast motherboards still have the ps/2 ports as well. Usually because the usb controller is the first thing to stop working when the bclk gets too high or you’re going sub 0 cooling.
Apparently some enthusiasts still use PS/2 keyboards because they have slightly faster response times / lower latency, and better support for n-key rollover.
The absolute lowest level of computers haven’t changed much, we still fuck around with interrupts. However, USB peripherals are a LOT more complicated than this, and if I’m not mistaken they’re polled by the connection master
removed by mod
PS/2 still works the same as it always has. No changes there. It’s not really possible to change how PS/2 operates because it wouldn’t be backwards compatible with old keyboards or software.
Legacy stuff sticks around for a while and generally doesn’t change, since it needs to retain backwards compatibility. Modern x86 processors also still have a “real mode” with 1MB RAM max, like what the 286 versions of DOS and Windows 3.0 used to use.
You can buy industrial PCs and motherboards today that not only have a PS/2 port, but also other legacy stuff like parallel and serial ports, ISA slots, etc. There’s actually motherboards that have ISA, PCI, and PCIe all on the same board. There’s 25+ year old machinery that’s still in use and extremely expensive to replace, so it’s not uncommon to have new computers with legacy connectors/ports in industrial environments.
Enthusiast motherboards still have the ps/2 ports as well. Usually because the usb controller is the first thing to stop working when the bclk gets too high or you’re going sub 0 cooling.
PS/2 keyboards are more likely to support n-key rollover, too (USB is maximum 6-key rollover by default).
I was surprised when I just bought a brand new workstation and it had PS/2 ports.
Apparently some enthusiasts still use PS/2 keyboards because they have slightly faster response times / lower latency, and better support for n-key rollover.
A20 gate is gone, IIRC
Recently did OSDEV on my machine running an ryzen 5 series. I was rolling my own bootloader and I still had to enable the A20 Line
The absolute lowest level of computers haven’t changed much, we still fuck around with interrupts. However, USB peripherals are a LOT more complicated than this, and if I’m not mistaken they’re polled by the connection master
my keyboard uses a PS/2 port
it’s really old but it’s pretty good